PRODUCT CENTER
- Projection system
- Sound systems
- SPS series
- Other equipment
1000P
Parameters of 10000Q Power Amplifier
Input Voltage/Frequency Response 220V/50Hz~60Hz
Stereo output power 8_/2*2400w 4_/2*44000w 2_/2*7000w
Bridge output power 8_/8000w 4_/14000w
Maximum undistorted power (8/40ms) 1000W
Input sensitivity (x 40/32 dB) 0.775v
Voltage gain 0.775V/0dBm*126
Normal power consumption 1500VA/5.4A
Maximum power consumption 3000VA/10.9A
Net weight 18.1 kg
Harmonic distortion: normal working conditions, 1 KHz < 0.025%
Intermodulation distortion: normal working conditions, 60 Hz/7 KHz-4/1 < 0.075%
Frequency Response: Normal Working Conditions Normal Working Conditions, 20 Hz-20 KHz <+/-0.25 dB
Power Bandwidth: Normal Working Conditions, Normal Working Conditions, -3dB 10Hz-50Hz
Phase Response: Normal Working Conditions Normal Working Conditions, 20Hz-20KHz <+/-8 Degree
Signal-to-noise ratio 1KHz, *40 (32dB), A weighting, > 112 dB
Damping coefficient: normal working conditions, 63 Hz > 1500
Conversion rate 10 KHz square wave, *40 dB (32 dbB gain > 112 V/us)
Normal working condition of input impedance, 1 KHz, balanced input 20K 0hm
Minimum load impedance stereo > 1.60 HM bridge > 3.20 HM parallel > 0.80 HM
Separation 1 KHz 1V input > 80 dB
Common mode suppression 1 KHz > 80 dB
Volume 88 mm X482 mm X400 mm
返回
400-166-2959
2258217144@qq.com
3/ F, Fubang Building, No.149 West Ring Road, Panyu District, Guangzhou